Rick's Motorcycles | Handlebar Clubstyle Performance 3 Black

This handlebar is Rick's Motorcycles' Clubstyle Performance 3 model, finished in black hard anodized 6061 T6 aluminum for an aggressive clubstyle moto bar look. The bar, also referred to as a moto bar or handlebar, uses a conical riser clamping area of 1-1/4" (32 mm) that is reduced to 1" (25.4 mm) at the bar ends, with a 3.6 mm wall thickness at the clamp area for added strength. It is drilled for internal wiring and finished with a lasered Rick's logo.

Key Features

• Black hard anodized 6061 T6 aluminum construction
• Conical riser clamping area, 1-1/4" (32 mm) reducing to 1" (25.4 mm) at bar ends
• 3.6 mm wall thickness at riser clamp area
• Lasered Rick's logo
• Drilled for internal wiring
• Aggressive Clubstyle moto bar design
• Compatible with H-D heated grips
• Design based on OEM 55800858 bar

Specifications

• Width: 812 mm (32") with E-throttle module installed
• Height: 82 mm (3.2")
• Pullback: 89 mm (3.5")
• Weight: 600 g
• Material: 6061 T6 aluminum, black hard anodized finish
• Riser clamp area: 1-1/4" (32 mm) reducing to 1" (25.4 mm) at bar ends
• Wall thickness at riser clamp area: 3.6 mm
• OEM reference: 55800858

Usage & Care Tips

• Installation requires an E-throttle setup with 1" I.D. risers
• Approval status depends on bike model and year; check with your local MCS dealer or the MCS sales department for the exact test report and its validity before fitting

Fitment

• HD: 2008-2024 (with approval, verify exact model and year validity with your MCS dealer)
• HD: FLHRXS 2024-2025
• HD: FLTRK 2024 (excludes 2024 FLT/Touring models and 2023-2024 CVO Touring)
• Requires E-throttle with 1" I.D. risers