Black powder coated aluminum finish/Gold anodized aluminum finish.

This bar allows standard hand controls to be mounted since it has a 1-1/8" (28.6mm) riser clamping area that tapers down to 1" (25.4mm). Both standard cable throttle and e-throttle (TBW / throttle By Wire) are compatible. Positioned to accommodate internal wiring.

• Dimensions: 32" (81 cm) broad, pullback 3" (7.6 cm) by rise 2.5" (6.4 cm).
•  Fits into the 1-1/8" Kraus Isolated Risers wire hole;
•  Does not work with heated grips
  
  Note: FM Fly Moto Style Bars are not compatible with wing-style perch clamps with location pin. (Non-compatible with OEM #41700321, #36700113).
  Note: If you plan to run stock 2014-up switch housings with this Kraus bar you will need to change your master cylinder and clutch perch clamps to early model clamps (Harley OEM part number 45138-08A black / MCS 900594 chrome).
  Note: Krause Pro-Line perch half clamps (MCS 984611) can be used if you plan to run stock 2014-up switch housings with the Kraus FM Fly Moto handlebars.
  
  Fits: > 82-23 H-D mech. & e-throttle with 1.25" I.D. risers